Provided by www.YuvaJobs.com - Crompton    Paper    Whole Testpaper       DELHI - 8  July  2006  


CROMPTON GREAVES PAPER - 08 JUL 2006 - DELHI 
1. mohr circle is used to find?
2. Wat wil hapen to height of a capilary tube-a) increses wit increase in diametrb) decrease wid increase in diametrc) inceare wit increase in specific weightd) decerase wid increase in specific weight
3. Specific speed of turbine signifiesa) rotational speedb) headc) flow rated) not remember
4. Power of a belt is givn by-a) massb) velocityc) arcd) all the above
5. At what temperature celsius nd faherinit is equal-answer. -40
6. Slenderness ratio of a mild steel is-a) >80b) <80c) >90d) <90
7. Magnet is made of which iron
8. Which is  weakest irona) springb) boltc) or optin yad nahn
9. Magnet north pole represents which direction
10. Speriodizing is a type of which proces
11. Normaling is done at a) above crystaline temp with quenchng of oilsb) below crystaline temp
12. Rivets r made by which processa) extrusionb) cold heatingc) forging
13. y mercury donot stick to the tubea) cohesive force>adhesive forceb) cohesive force <adhesive forcec) cohesive force =adhesive force
14. y cage is provided in bearing in between the balls
15. Wear allowance on go no go is for which enda) gob) no go
16. If area, length, diametr, stres r doubled what wil hapen to the strain energy?
17. If a spring of stiffnes of k is divided in 4 parts and then joined in paralel then what wil b the resultant stifness
18. ek bearing lubrication ka question tha
19. How can we increase the pressure angle of a gear
20a) plaster of paris is extracted from bauxite, true / falseb) ek or tha yaad nahi
21. What is 18-4-1 mild steel?18 mei kiska kitna composition hai, 4 or 1 mei bhi
22. What is the shape of bending moment of cantilever with udl over it?
23. Surface measurement RA is taken in which units?a) micronb) mm2c) dnt remember
24. In which fit clearance wil b more for hole and shaft?h6g8h6e8h9f9h9d8
25. If spring is in compressive stresses then major stresses wil b
26. Velocity ratio of gear wil b equal at which point?
27. How much is thermal efficecy of internal combustion engine?
28. Internal spur gear is mass produced by which process
29. ek hooke joint ka tha question?
 
Provided by www.YuvaJobs.com - Crompton    Paper    Whole Testpaper       DELHI - 8  July  2006