Provided by www.YuvaJobs.com - Technical - Other       NIT - 30  August  2007  


JOHN DEERE TEST PAPER 

 
You will be given 20 min ( 20 questions) for aptitude to complete and after that they will provide you Technical test paper for 30 mins( 30 questinos).
this is conducted in NITK on 30/8/2007.
 
Negative marking is there 0.25m
 
They prefer mainly mechanicals . Presently they are having more demand in product development and analysis.
 
After test Technical Interview.
 
Apti .
 
1. Two cadles of same length  but with different thickness aftyer wat time both will be of same length. as life of thick candle is 6 hours and of thin is 4 hours.
 
2. Boat moving up the stream and down the stream.
 
3. 0.75*0.75....... but answer is  0.825.
 
4 Infinite series 1+1/1+1/2+1/3...... answer is       pi (MATH VALUE)
 
5 Simple blood relation questions...TWO questions
 
6. Some changing in words alphabetical sequences....easy to answer.
 
7. Some english meanings.........
 
8. Some symbols on cubes and after roitations wat is final symbol u observe..
..............
 
 
TECHNICAL ( resembles GATE standards)
 
1. Key and torque lever question and answer is 750N
2. Acceleration in rotaing field....
3. Dozers are used to pull are push ( BULL DOZERS)
4. Main cause for fog formation.....
5. Use of mercury in binary cycle .specific reason.
6.Why donot we use super chaeger in si engines ... becoz of knocking .
7.Sheet metal operation min thickness compressed bfore fracture.... it is t/3.
8.Cavitaion occurs at .......... at high pressure zone as bubbles form at low pressure and blast at high pressure.
9.....................
 
 
In INTERVIEW THEY ASKED ONLY HR in which arear u r interested and reasons. induatrial experiences .
software knowledge on design and analysis. and process and product layout softwares..
ur strong points......

Provided by www.YuvaJobs.com - Technical - Other       NIT - 30  August  2007